Skip to main content

EMI

These instructions detail how to use the data viewer during EMI testing.

  1. Update to get the newest EMI window config
    1. Open a terminal
    2. cd ocigse
    3. git pull
    4. Close terminal
  2. On the bottom menu bar, click on "ocidataview"ocidataview and select the "OCI Data Viewer"Viewer window.

  1. At the top of this window is a menu bar. Select Setup -> 'Restore Windows'Windows

  2. Select 'emi'emi and click OK. This will load the 'emi' window configuration and may take up to a minute to reload the cached data.

  3. You can switch between the open viewers by clicking on the ocidataview in the menu bar and then selecting a viewer from the list.

  4. The 4 main viewers you will be using are:

    • SSM Ch Stats vs. Time - AVG - Displays AVG counts for the whole scan per SSM channel.
    • SSM Ch Stats vs. Time - SD - Displays SD for the whole scan per SSM channel.
    • Stats Per Pixel vs. Time - AVG - Displays AVG counts for the whole scan per FPA pixel.
    • Stats Per Pixel vs. Time - SD - Displays SD for the whole scan per FPA pixel.

Susceptibilities are more apparent in the SD variants; below is an example of what this may look like:

``

Back to top